The Ford E4OD transmission was designed to fit behind various powerplants including gas and diesel engines. Most failures revolve around the torque of the diesel motor, especially when power is...
The Ford E4OD transmission was designed to fit behind various powerplants including gas and diesel engines. Most failures revolve around the torque of the diesel motor, especially when power is increased over stock. The good news is that the framework of the E4OD allows for substantial increases in reliability and capability. Includes:
ATS Five Star Torque Converter featuring a billet cover, five lock-up clutches, available in either low or high stall configurations
High performance overdrive, intermediate and forward clutch packs, with one additional clutch added per section
Modified transmission pump to increase line pressure, which provides increased clamping force on the clutch packs
Modified valve body that focuses around precise shifts, increase line pressure and increasing the torque capacity of the E4OD
New bearings, seals and gaskets
New low roller clutch, heavy duty intermediate sprag, bonded coast and overdrive pistons
ATS Deep Transmission Pan which adds 5 quarts of fluid over stock, which helps keep the transmission cool
The ATS Stage 1 Package is designed for trucks that are used for light towing, daily driving and stock or slightly modified power levels. The transmission package comes with a 5 year/500,000 mile warranty. Features:
E4OD Stage 1 Package 1989-1991 Ford 2WD
Engine Manufacturer: Powerstroke
Make: Ford
Models: F-250/F-350/F-450
Fuel Type: Diesel
Drive: 2WD
Transmission Model: E4OD
Warranty:5 year/500,000 mile warranty
Sold As: Kit
ATS LIMITED PRODUCT WARRANTY
ATS Transmission packages carry a ONE to FIVE YEAR Warranty. There are several exceptions, so refer to the Warranty’s specific terms and conditions . All labor, shipping, or any other charges associated with the product and the product’s failure are not covered under Warranty. Labor and/or shipping charges will not be refunded under any circumstance. After the one-year anniversary date of the original purchase, there is a limited parts replacement Warranty only. Transmissions that are purchased separately outside of a transmission package / stage and are installed without an ATS torque converter carry a 1 year parts only warranty and there is no labor or shipping allowance for transmission only purchases.
In the event of a product failure, the consumer must return the defective product to ATS for inspection before a replacement is sent to the consumer. After ATS inspects the product and completes the failure analysis, the inspection officer at ATS will provide written documentation stating the condition of the product and determine, to the best of his or her ability, what caused the malfunction or complaint. Based on the findings of the inspection report, ATS will determine whether there is a valid Warranty claim. Should a consumer require immediate service, and chooses not to wait for their product to be returned to ATS for inspection, service, and potential repair or replacement, the consumer can purchase a replacement product from ATS. The consumer must pay the full current MSRP, the applicable core charge, and shipping to and from ATS’ shop. When the defective product arrives, ATS will refund the core charge and inspect the product. During inspection, ATS will assess the product for warrantable damage. If the original product has indeed failed under the terms of the original Warranty, ATS will refund the full purchase price for the replacement product only. If the product has failed due to any issue not covered under the original Warranty, ATS will assess charges to the consumer based on any parts necessary to return the product to nominal ATS standards. ATS will deduct the total cost of required parts from the replacement product’s purchase price, and the consumer will be refunded the difference (if any) between the purchase price paid for the replacement product and the cost of parts.
If the consumer can wait for their product to be returned to ATS for inspection, service, and potential repair or replacement, the consumer pays shipping to and from ATS’ shop. When the defective product arrives in Colorado, ATS will inspect the product. ATS will then assess the product for warrantable damage. If the product has failed under the terms of the original Warranty contract, ATS will repair or replace the product – at ATS’s discretion. If the product has failed due to any issue not covered under the original Warranty, ATS will assess charges to the consumer based on any parts necessary to return the product to nominal ATS standards. ATS will bill the consumer for the total cost of parts required for repair of the product, and shipping to and from Colorado, prior to the repaired/replaced product being sent to the consumer.
ATS Manual Transmissions Warranty
This section incorporates Section 2, entitled “In the Event of a Failure.” ATS manual transmissions carry a 1-year/12,000 mile Warranty. ATS will not pay for any fluids replaced in the event of a transmission failure. There is no labor or freight warranty coverage on standard transmissions. Manual transmission shafts and gears are not covered by this Warranty on any transmission due to the capability of certain situations to cause stress-loads beyond the structural ability of the shaft or gear.
ATS Full Allison Conversion Kit, Stage 1 Transmission Build (ATS Built Transmission and Deep Pan) Replaces 4-Wheel Drive 68RFE 2007.5-2009 68RFE TO ALLISON 1000 Conversion Kits For RAM 6.7L CUMMINS...
ATS 5.9L Cummins To Allison Conversion Kit Fitment: 1998.5 To 2007½ Dodge Ram 5.9L Cummins ⚠ NOTE: You will need to flash the ECM to a standard transmission calibration. ATS...
SFI approved billet flexplates from ATS will hold up under the most extreme conditions. ATS billet flexplates are SFI approved, meaning that they stand up to the toughest race application...
Serving truck enthusiasts for nearly two decades, ATS invents, designs, manufactures, and sells the world's most innovative diesel truck performance products - over 600 products for one-stop shopping. Whether you...
SFI approved billet flexplates from ATS will hold up under the most extreme conditions. ATS billet flexplates are SFI approved, meaning that they stand up to the toughest race application...
