ATS E4Od 4R100 5R110 Billet Input Shaft Fits 1989-2010 Power Stroke

$475.00

The ATS Billet input shaft is the back bone of your Ford Powerstrokes transmission. It is the first hard part to bring power into the transmission and transmit that power...

FREE
SHIPPING

100% MONEY
BACK GUARANTEE

ONLINE
SUPPORT 24/7

Carb E.O.#: 49 State Legal

Sku: 304-910-3104

Vendor: ATS Diesel Performance

Description
ATS Warranty

The ATS Billet input shaft is the back bone of your Ford Powerstrokes transmission. It is the first hard part to bring power into the transmission and transmit that power to the wheels. With no dampening or power loss other than the torque converter, the input shaft has a lot to handle. Now add power, weight from a trailer, bigger tires (and is some cases all these things together) and you will be well beyond what that factory shaft was designed for.

The theory behind billet shafts is not quite what you may have in mind. The key to success is not to make the shaft stronger necessarily, but give it the ability to absorb more torsional load. The way we do this, is by using billet shafts, they have the ability to rotate further with out breaking. This is going to give the transmission more give and allow it to transmit more torque and more load with out breaking.

Along those lines, breaking an input shaft can be catastrophic to your transmission. Sometime when the shaft breaks, your truck will simply stop moving and it needs a new input shaft. Other times, when that shaft breaks, it can take out your torque converter, front pump, and front seal as well. Obviously this is going to be a very costly repair. Then add on top of that labor time, fluids, new gaskets and seals, and you can quickly see how this can add to the cost fairly quickly.

It is simply good insurance to hold reliable power in your transmission, to add at minimum a billet input shaft.
Details:

Input Shaft, Billet, E4OD/4R100/5R110 (Recommended over 400HP)
Unsurpassed reliability
Able to handle high power applications
Great for towing
Increases torque capacity
Good way to help ensure you transmission does not break
Made From Billet Steel
Sold Individually
SKU: 3049103104

Fits Vehicles:

Ford F250/F350/F450 Truck w/Powerstroke Engine and E4OD|4R100|5R110 Transmission

ATS LIMITED PRODUCT WARRANTY

ATS Transmission packages carry a ONE to FIVE YEAR Warranty. There are several exceptions, so refer to the Warranty’s specific terms and conditions . All labor, shipping, or any other charges associated with the product and the product’s failure are not covered under Warranty. Labor and/or shipping charges will not be refunded under any circumstance. After the one-year anniversary date of the original purchase, there is a limited parts replacement Warranty only. Transmissions that are purchased separately outside of a transmission package / stage and are installed without an ATS torque converter carry a 1 year parts only warranty and there is no labor or shipping allowance for transmission only purchases.

In the event of a product failure, the consumer must return the defective product to ATS for inspection before a replacement is sent to the consumer. After ATS inspects the product and completes the failure analysis, the inspection officer at ATS will provide written documentation stating the condition of the product and determine, to the best of his or her ability, what caused the malfunction or complaint. Based on the findings of the inspection report, ATS will determine whether there is a valid Warranty claim. Should a consumer require immediate service, and chooses not to wait for their product to be returned to ATS for inspection, service, and potential repair or replacement, the consumer can purchase a replacement product from ATS. The consumer must pay the full current MSRP, the applicable core charge, and shipping to and from ATS’ shop. When the defective product arrives, ATS will refund the core charge and inspect the product. During inspection, ATS will assess the product for warrantable damage. If the original product has indeed failed under the terms of the original Warranty, ATS will refund the full purchase price for the replacement product only. If the product has failed due to any issue not covered under the original Warranty, ATS will assess charges to the consumer based on any parts necessary to return the product to nominal ATS standards. ATS will deduct the total cost of required parts from the replacement product’s purchase price, and the consumer will be refunded the difference (if any) between the purchase price paid for the replacement product and the cost of parts.

If the consumer can wait for their product to be returned to ATS for inspection, service, and potential repair or replacement, the consumer pays shipping to and from ATS’ shop. When the defective product arrives in Colorado, ATS will inspect the product. ATS will then assess the product for warrantable damage. If the product has failed under the terms of the original Warranty contract, ATS will repair or replace the product – at ATS’s discretion. If the product has failed due to any issue not covered under the original Warranty, ATS will assess charges to the consumer based on any parts necessary to return the product to nominal ATS standards. ATS will bill the consumer for the total cost of parts required for repair of the product, and shipping to and from Colorado, prior to the repaired/replaced product being sent to the consumer.

ATS Manual Transmissions Warranty

This section incorporates Section 2, entitled “In the Event of a Failure.” ATS manual transmissions carry a 1-year/12,000 mile Warranty. ATS will not pay for any fluids replaced in the event of a transmission failure. There is no labor or freight warranty coverage on standard transmissions. Manual transmission shafts and gears are not covered by this Warranty on any transmission due to the capability of certain situations to cause stress-loads beyond the structural ability of the shaft or gear.