ATS Benchtop Turbo Calibration Tool w/ Wiring Harness AdaptersFitment: 2007½-current Dodge Ram 6.7L CumminsThe ATS Benchtop Turbo Calibration Tool is an all in one turbo diagnostic and programming tool that...
The ATS Benchtop Turbo Calibration Tool is an all in one turbo diagnostic and programming tool that can zero, initialize and calibrate any turbocharger actuator on the market via downloadable software and turbocharger harness adapters. If we do not currently have the software to calibrate a specific type of turbo send us a functional actuator and we will write the software at no charge and send it to you with the proper harness adapter.
The Benchtop calibration tool can be used for both 12 volt and 24 volt turbochargers with the flip of a switch. All calibration machines use high quality 16 gauge steel enclosures that are powder coated for longevity, feature solid state electronics with large cooling fans so it can run all day reliably and utilize Honeywell locking toggle switches that are water and dust resistant. These machines are very easy to use and quickly diagnose problem actuators, bit failures or failed boards within an actuator.
The Benchtop also makes it incredibly easy to accurately zero, initialize and calibrate a brand new actuator and will give you an extremely accurate sweep to your turbocharger for the most effective spool up and exhaust braking.
ATS Transmission packages carry a ONE to FIVE YEAR Warranty. There are several exceptions, so refer to the Warranty’s specific terms and conditions . All labor, shipping, or any other charges associated with the product and the product’s failure are not covered under Warranty. Labor and/or shipping charges will not be refunded under any circumstance. After the one-year anniversary date of the original purchase, there is a limited parts replacement Warranty only. Transmissions that are purchased separately outside of a transmission package / stage and are installed without an ATS torque converter carry a 1 year parts only warranty and there is no labor or shipping allowance for transmission only purchases.
In the event of a product failure, the consumer must return the defective product to ATS for inspection before a replacement is sent to the consumer. After ATS inspects the product and completes the failure analysis, the inspection officer at ATS will provide written documentation stating the condition of the product and determine, to the best of his or her ability, what caused the malfunction or complaint. Based on the findings of the inspection report, ATS will determine whether there is a valid Warranty claim. Should a consumer require immediate service, and chooses not to wait for their product to be returned to ATS for inspection, service, and potential repair or replacement, the consumer can purchase a replacement product from ATS. The consumer must pay the full current MSRP, the applicable core charge, and shipping to and from ATS’ shop. When the defective product arrives, ATS will refund the core charge and inspect the product. During inspection, ATS will assess the product for warrantable damage. If the original product has indeed failed under the terms of the original Warranty, ATS will refund the full purchase price for the replacement product only. If the product has failed due to any issue not covered under the original Warranty, ATS will assess charges to the consumer based on any parts necessary to return the product to nominal ATS standards. ATS will deduct the total cost of required parts from the replacement product’s purchase price, and the consumer will be refunded the difference (if any) between the purchase price paid for the replacement product and the cost of parts.
If the consumer can wait for their product to be returned to ATS for inspection, service, and potential repair or replacement, the consumer pays shipping to and from ATS’ shop. When the defective product arrives in Colorado, ATS will inspect the product. ATS will then assess the product for warrantable damage. If the product has failed under the terms of the original Warranty contract, ATS will repair or replace the product – at ATS’s discretion. If the product has failed due to any issue not covered under the original Warranty, ATS will assess charges to the consumer based on any parts necessary to return the product to nominal ATS standards. ATS will bill the consumer for the total cost of parts required for repair of the product, and shipping to and from Colorado, prior to the repaired/replaced product being sent to the consumer.
ATS Manual Transmissions Warranty
This section incorporates Section 2, entitled “In the Event of a Failure.” ATS manual transmissions carry a 1-year/12,000 mile Warranty. ATS will not pay for any fluids replaced in the event of a transmission failure. There is no labor or freight warranty coverage on standard transmissions. Manual transmission shafts and gears are not covered by this Warranty on any transmission due to the capability of certain situations to cause stress-loads beyond the structural ability of the shaft or gear.
ATS Aurora 3000 Turbo System The ATS Aurora 3000 turbo is designed for trucks that tow, daily drive and have minor injection pump modifications (governor spring kit, modified fuel plate,...
ATS Aurora VNT Turbocharger Kit Fitment: 2011-2014 Ford Pickup 6.7L Power Stroke Tired and fed up with the Twin Scroll turbo’s ball bearing failure points, ATS set out to build, from the ground up,...
The ATS Ported Housing offers significant advantages beyond a replacement compressor wheel. The upgraded housing with factory wheel actually flows more air than the WW replacements. This Ported Housing will...
ATS Aurora VNT Turbocharger Kit Fitment: 2011-2016 Ford Cab And Chassis 6.7L Power Stroke Tired and fed up with the Twin Scroll turbo’s ball bearing failure points, ATS set out to build,...
ATS Benchtop Turbo Calibration Tool (Box and Power Wiring Only, No Adapters) The ATS Benchtop Turbo Calibration Tool is an all in one turbo diagnostic and programming tool that can...
Introducing the newly redesigned ATS Aurora Plus 5000 Compound Turbo Kit. This kit uses the stock HE351 turbocharger and combines it with the powerful ATS Aurora 5000 turbocharger to give...
Aurora 3000/5000 Twin (Compound) Turbo Kit. Fits 12V Dodge 1994-98 5.9L. Complete with Turbos, Large turbo on top front gate Manifold, Piping and all Mounting Hardware.Features: Aurora 3000/5000 Twin Turbo...
This is the ultimate budget compound kit. Get the best of both worlds for you 2007.5-09 Dodge 6.7L Cummins with the Aurora Plus 5000 turbo kit. With running a set...
